2018 Miyano BNA-42GTY with H.P. 1,000 PSI Cool Blaster unit, Chip conveyor, tons of tooling including live tooling in “LIKE NEW” Condition.

2004 Mori Seiki ZT-1500SY with twin turret, twin spindle, live tooling, Y axis, MAPPS III Control, Iemca 12’ Magazine barfeed. 2” Bar capacity with guide channel sets ranging from 1” and 2” max, Microcentric quick change collet chuck on the main and royal on the sub spindle. Or owner is willing to include Microcentric quick change for the sub spindle and a list of live tooling included

2014 Doosan Puma 2600MY with Live tooling, Y axis, parts catcher, 10” Chuck ,Fanuc i Series control, chip conveyor, tailstock, MTA V-65LE 4’ Magazine barfeeder with lots of guide channels included

2004 Mori Seiki Super HiCell 250/1600  - 62.9" Bed Length

7-Axis Flat Bed Turning Center with Milling

Swing on Bed: 500 mm (19.98")

Swing on Carriage: 400 mm (15.74")

Extended Bed: 1600 mm (62.9") Max Shaft Length

Max Chuck Diameter: 254 mm (10")

Sub-Spindle Outside Diameter: 210 mm (8.26")

Bar Operation: 65 mm (2.55")

Spindle Revolution Speed: 30-4000 mm

Spindle Nose Shape: A2-8

Spindle Hole through Spindle: 78 mm (3.07")

Turret Head

Turret Head Type: 2 Face SQCT Rotating Tool Turret

Number of Tools Mounted (2) ( 1 Turning Tool & 1 Rotating Tool)

Shank Size: 25

Indexing Angle: 5

Rotating Tool Spindle

Spindle Rotating Speed: (120-12000)

Spindle Taper: NT 40 Short Taper

Automatic Tool Changer: 60

Tailstock Spindle Taper: MT-5

Sub-Spindle

Spindle Revolution Speed: 50-5000

Spindle Nose Shape: A2-5

An Assortment of Tooling will be included with the Machine (to be determined)

Under-Power

Manuals Included

All Specifications subject to verification

2016 Mori Seiki NZX-1500/800SY delivered in 2018 has twin spindles, live tooling, twin turrets with Y axis on the upper turret, chip conveyor. 2” Bar capacity and only 1100 cut time hours. There is a 2005 LNS 4’ Magazine barfeed available along with a nice tooling package including 8 live tools (4 right angle and 4 straight heads). 2 8” chucks and 2 nose collets.

2014 Mazak QTN250MS-II

Absolute Positioning Sys

Tool Eye (Automatic)

12 Position Turret

Live Tooling

C Axis (.0001 Degree Incr.

Spindle Bore Dia. (3.58")

Kitagawa B-210A8 (3.03" CAP)

Sub Spindle

Sub Spindle C Axis

Chip Conveyor

Robot Interface

1998 Mazak SQT250MS with Mazatrol T Plus, Live tooling, sub spindle, 2 1/2" Thru hole, low hours

2006 Haas TL-25B Big Bore lathe with Full C-Axis, Sub Spindle, Live tooling, 4" thru the spindle, and Haas Servo Bar 300 barfeed. 

GENOS L400

OKUMA P-200-LA-II Control

Spindle Nose JIS A2-8, V12 NC Turret, Non-Lift Type Slotted Inch Bolt Type, Hydraulic Power Unit, Coolant Supply System, Tank, and Pump Motor, Chip Conveyor Side Discharge, 10" Hydraulic Hollow Chuck, Draw Tube, and Hydraulic Cylinder, Chuck Auto Open/Close with Confirmation, Hydraulic Tailstock with Dead Quill and MT #5, Rotating Center with MT#5, Rotating Center with MT#5, Manual Touch Setter, API Lathe Software Development Kit, Advanced One Touch IGF Conversational Programming System

Specifications:

20.47" Swing

12.2" X 19.68" Turn Dia X Length

20HP, 3000RPM, A208 Spindle, Tourqe 420ftlbs 25-251 RPM

12 Position Turret, .3 Sec index

787/984IPM Rapid Traverse

100PSI Coolant System

15" TFT Touch Screen

40GB HD, 512MB RAM, 4 USB, Ethernet, RS232

2009 EmcoTurn 420MC with FMB Magazine barfeed that feeds both spindles. Siemens Control.

Technical Data EMCOTURN 420 MC with Siemens Control

Workspace
Swing above slide Ø160 mm (6.3") 
Main spindle to counter-spindle 408 mm (16.1") 
Max. turning diameter Ø100 mm (3.9") 
Max. part length 600 mm (23.6") 
Max. bar-stock diameter 26 mm (1.0")

Travel
Travel in X/Z 78 mm (3.1") 
Travel in Y 210 mm (8.3")

Main spindle
Speed range 0 – 5000 rpm
Max. Torque at spindle 38 Nm (28.0 ft/lbs) 
Spindle adapter Ø70 h5
Spindle bearing (inside diameter at front) Ø60 mm (2.4") 
Spindle bore Ø38 mm (1.5")

Counter-spindle
Speed range 0 – 5000 rpm
Torque at spindle 38 Nm (28.0 ft/lbs) 
Spindle adapter Ø70 h5
Spindle bearing (inside diameter) Ø60 mm (2.4") 
Partially hollow clamp with chuck/jaws for dia. Ø 26 mm (1”) approx. 100 mm (3.9") 
Travel (Z2) 233 mm (9.2")

C-axis
Resolution of rotary axis 0.001° 
Rapid traverse 1000 rpm
Spindle positioning, all 4 spindles 3°

Drive power
Main spindle and counter-spindle 9 kW (12 hp) cont.

Tool changer
Number of tool stations 2 x 12
VDI shaft (DIN 69880) VDI 16
Tool cross-section for square-shank tools 16 x 16 mm (0.6 x 0.6") 
Shank diameter for boring bars 25 mm (1") 
Turret indexing time 0.4 sec

Driven tools
Speed range 0 – 5000 rpm
Max. Torque 3 Nm (2.2 ft/lbs) 
Max. Drive power 1.6 kW (2.2 hp) 
Number of driven tools 2x 4

Feed drives
Rapid traverse X/Z; X1/Z1 12/20 m/min (472/787 ipm) 
Feed in X 3000 N (674 lbs) 
Feed in Z 3000 N (674 lbs) 
Acceleration time for 0 to rapid traverse X/Z 0.1 sec

Coolant system
Tank capacity 200 Liter (53 gal) 
Pump power (optional) 0.57 (2.2) kW (0.8 (3) hp)

Power consumption
Connected load 15 kVA
Supply pressure 6 bar (87 PSI) 
Supply rate 300 I/h (79 gpm)

Specifications to be verified by purchaser

2008/2009 Mori Seiki NZ2000T2Y2 purchased new in 2009, H.P. Coolant on both spindles, through spindle coolant for sub spindle for Chip Evacuation, twin turret with Y axis on both turrets, twin spindle, live tooling, 16 station turrets, parts catchers on both spindles, lots of tooling included. Also including 12’ Iemca Master 880 Magazine barfeed. 8” Kitagawa Chucks on both spindle, ATS S-26 Collet Chucks for both spindles., parts ejector for sub spindle.

1993 Hardinge CHNC1 gang tool lathe with GE Fanuc Series O-T Control, 6” Chuck, Chip conveyor

2012 Eurotech Rapido B436-Y2 with twin spindles, twin turrets, Y axis on both turrets, Live tooling, C axis on both spindles, chip conveyor, Mitsubishi M-700 Control, list of live tooling. LNS Servo S-3 available if needed.

B436Y2

MACHINING CAPACITY

Bar capacity mm 36

Max. machining diameter mm 100

Max. machining length mm 100

Max. swing over diameter mm 140

MAIN SPINDLE - SUB-SPINDLE

Max. speed rpm 7000

Spindle nose (flange connection) mm 115

Spindle bore mm 46

Drawtube inside diameter mm 37,5

Inner diameter of bearings mm 75

Chuck diameter mm 110

Max. motor power kW 11

Max. torque Nm 62

C-axis: min. programmable value ° 0,001°

X3-axis: sub-spindle offset stroke mm-m/min 170 - 15

Z3-axis: sub-spindle stroke - rapid traverse mm-m/min 340 - 30

UPPER TURRET 1 - LOWER TURRET 2

Number of tools 12

Turret indexing (1 pos) sec 0,15

Live tools : number of tools 12

Max speed rpm 6000

Motor power kW 2,2 / 4,6

Max torque Nm 22

X1-X2 axes stroke - rapid traverse mm-m/min 85 - 15

Z1-Z2 axes stroke - rapid traverse mm-m/min 300 - 30

Y1-Y2 axes stroke - rapid traverse mm-m/min 50 [-25/+25] - 15

COOLING SYSTEM

Tank capacity l 200

Pressure with standard pump bar 7

DIMENSIONS AND WEIGHT

Machine with swarf conveyor mm 3687 x 1515 x 1992 h

Spindle centre height mm 1015

Machine weight with swarf conveyor kg 4700

1999 Gildemeister MF Sprint 65 with 12 ft. Gildemeister barfeed, Siemens Sinumerik control, twin turret, twin spindle, with 2 8 station turrets, 4 live on the top turret, Parts conveyor, chip conveyor and a ton of tooling included. There is also a software program.

1996 Hardinge GT27SP with a 2005 Iemca Trilogy 32 12’ Magazine barfeed, GE Fanuc Series 18-T Control, 1 gang tool slide for turning, threading, drilling, tapping, and cut off tools. With parts catcher and 1 Live tool. All tooling is included. 1” Maximum turning

2005 Mori Seiki NL-2500MC:

SPECIFICATIONS:

SWING OVER BED 36.4"

SWING OVER CROSS SLIDE 29.7"

MAX CUTTING DIAMETER 14"

MAX CUTTING LENGTH 27.7"

X-AXIS TRAVEL 10.2"

Z-AXIS TRAVEL 31.3"

CHUCK SIZE 10"

BAR CAPACITY 3.1"

SPINDLE BORE 3.6"

SPINDLE NOSE A2-8

SPINDLE MOTOR 25 hp

SPINDLE SPEED 4,000 RPM

TURRET CAPACITY 12

TURRET TYPE BMT65

LIVE MILLING Yes

LIVE MILLING SPEED 6,000 RPM

LIVE MILLING MOTOR 7.5 hp

EQUIPPED WITH:

LNS QUICK LOAD SERVO S3 BAR FEEDER

MORI SEIKI MSX-850 CONTROL

LIVE MILLING

10”, 3-JAW HYDRAULIC CHUCK

TAILSTOCK

TOOL PRESETTER

CHIP CONVEYOR

(3) AXIAL LIVE TOOL HOLDERS

(2) RADIAL LIVE TOOL HOLDERS

2008 MAZAK QTN450II with 20" ATS Air Chuck, 20" Secondary Scroll Chuck(Bison), Max. Swing 33.1", Max Dia. 22.8", Max Length 40", Thru bore 7.28", X Axis 12.12", Z Axis 42.12"

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BMT55), 3 Jaw Chucks for the Main and Sub spindle, 2006 IEMCA BOSS 551 Magazine Barfeeder, 1 set of guide channels that max out the bar capacity to 1 5/8 Round, Will run as small as 3/8" Diameter

1998 Okuma MX-50HB with OSP-U100M Control, CAT 50 Taper, 60 ATC,

Travels: X: 27.55, Y: 31.49, Z: 27.55, 360 (1degree units), .001-degree Indexing NC Rotary Table, 2 Pallets, Maximum RPM: 10,000, Tool Change speed: 2.0 Seconds,  New Spindle Chiller and Thru the spindle pump approx. 2 months ago. One tombstone included along with some tool holders. Needs to be moved between April 21-27, 2019

2 Matsuura MAM-600HF HMC's with 27 Pallet Cell:

Axis Travel X – axis 600 mm (23.62”)
Y – axis 600 mm (23.62”)
Z – axis 625 mm (24.60”)
B – axis .001 Degree
Pallets 27 400 mm x 400 mm (15.75” x 15.75”)
Work piece Weight 400 kg (881 pounds)
Height 600 mm (23.62”)
Width 600 mm (23.62”)
Milling Spindle Speed 15,000 RPM
Taper JIS B 6339 40T
Torque 198 N.m / 135 N.m cont. (146 ft. lbs. / 99.5 ft. lbs. Cont.)
Tool Changer Capacity 240 per machine
Tool Diameter 80 mm / 150 mm Max. (3.15” Max. 5.91”)
Tool length 350 mm (13.78”)
Tool Weight 10 kg. (22 Pounds)
Rapid Traverse X, Y, Z Axis 24,000 mm/min. (944.8 IPM)
Feedrate X, Y, Z Axis 1-10,000 mm/min. (0.04 - 393.70 IPM)
Machine Weight Each machine (24,250 pounds)
Equipped with:
Yasnac i80
27 pallet cell stocker with Fanuc cell control
Work load stations (Qty.2)
1000 PSI high pressure coolant through spindle (ChipBlaster)
4th axis with scale feedback
240 tool magazine per machine
Coolant shower system
Manual pulse generator
Lift-up chip conveyor system with expanded tank and pumps
In-process measure and broken tool detect with macro and skip function G31
Expanded memory to 2Meg
Auto power on/off weekly timer
C-type cornering control
Program copy G25
Helical interpolation G02/G03
Circle cutting G12/G13
Unidirectional approach G60
Work coordinate G54-G59 system – 162 sets C
Scaling function G50/G51
Hole pattern cycles G70/G71/G72
Coordinate system rotation G68/G69
User Macros
Multi window editing
Additional program numbers - 299
Additional tool offsets - 1199
Skip function A-G31
Multi active register
Local coordinate system G52 Q2
Canned cycle B
Common variable 300 sets
Expanded editing function
All available manuals

1998 Mazak HTC400 Horizontal Machining center with 10,000 RPM, 30 ATC, 1 degree 4th axis, chip conveyor, 4 square tombstones included

2017 Kitamura HX-250G with 15,000 RPM spindle, 30 Taper Big Plus spindle, 40 ATC, Full 4th Axis, 220 PSI Thru spindle coolant, Renishaw Probe, one extra pallet, 2 Chick Tombstones and 14 tool holders included. This machine was purchased for a specific job that they never landed. It only has 36 Hours on it!

1998 Kitamura H400 2 pallet (15.7” X 15.7”, Travels: X-24.02”, Y-20.08”, Z-20.08”, 10K RPM Spindle, Cat 40, 100 Tool Magazine Capacity, Fanuc 15MB w/10.4” Color LCD, Full 4th Axis table, Coolant thru the spindle, Chip conveyor, Auto Pallet Recognition, Rigid Tapping, Spindle Oil Cooler, 1280 Meters of Memory, Tool life management, Coordinate System Rotation.

2004 Spego 6 bar barfeed model 126-12 with capacity from 1/4" up to 1 1/2" bar. Was used on a Mori-Seiki lathe

Clausing Kondia with a Prototrak M2 Digital readout

2011 Majestic FD1822 Bridge Mill with Fanuc 18iMB Control

X-Axis Travel:  86.6"

Y Axis Travel: 78.8"

Z Axis Travel: 31.5"

Distance between Columns: 72.8"

Distance from spindle nose to table: 7.8"-39.3"

Spindle Type: Geared

Spindle Taper: CAT-50

Spindle speed: 6,000 RPM

Zeiss Eclipse

The software is calypso 5.4 version 5.4, the latest up to date software available for this Zeiss.

This has an approximate work area of 30x40 inches

#1) Brand new, Turbo Model # 5475-8886

#2) Slightly used for 6 months, Turbo Model # 5475-8886

These 2 chip conveyors came off of 2 new Hyundai  Kia machines in 2006.  A SKT100 and a SKT200.  I'm pretty sure they take the same chip conveyor they look identical to me.  One was slightly used and the other was never used. They have been stored for maybe 10 years when one machine was sent back and the other machine was cancelled.

2008 IEMCA BOSS 551-E that was purchased with a Doosan TT Lathe.. Included is one 33.25 pusher.

2001 LNS Express 326 Magazine barfeed off of a Citizen L-20

Rosler 6/1000 SF Drag Finishing Machine Brand New,

PRICE....................: U.S. $ 149,500 MODEL: 6/1000 SF SPECIFICATIONS: Rosler 6/1000 SF Drag Finishing Machine Brand New, Still in Manufacturers Crate Drag Finishing Machine, never used in immaculate condition! Unit purchased for a project and project was cancelled. Unit was over $205,000.00 when purchased -- available immediately. Unit has Full Warranty attached with it & start-up assistance can be discussed as well. Unit may be inspected upon respect. any questions, email and will reply promptly Unit was for Medical or Aerospace Finishing. Some Tooling is available -- Additional Tooling could be designed and made for buyer if needed.

2 Crest Ultrasonic Cleaning systems Model OC5-1218-HE available, a 4 compartment and a 5 compartment

Both systems were in a medical facility and in excellent condition

Ultrasonic Precision Cleaning Systems | Optimum Console | Crest

2004 LNS HYDROBAR EXPRESS 332 12’ Magazine barfeed off of a Star sliding headstock machine for sale

ADVANTAGE Chiller Model SC-2APT-40HFX off of a Charmille Robofil 510 Wire EDM. The EDM was sold to a customer that has a Central Chiller system and did not need this. Need to move ASAP! Located NW of Chicago, IL.

1999 Star SV-20 with less than 5,000 hours, great condition, with Express 226 12’ Magazine barfeed, tool presetter, parts catcher/conveyor, brand new Cool Blaster(never used), lots of tool holders, approx. 8 Live tool holders for turret. Under power and available for inspection in midwest.

2008 Citizen A-20 type VII with 2,000 PSI Cool Blaster and Mist collector

2007 Star SR-10J machine with FMB 2-18 Magazine barfeed and Coral Mist Collector. I have 2 available for sale

2017 Star SB-12R type G for sale with Fanuc Series Oi-TF Control, FMB Turbo 3-26 Magazine Barfeed with 10 MM Channel, 3/16” Pusher, High Pressure Unit, Mist Collector, Live backworking. ONLY 1800 Cut Time Hours on this machine.

(2) 2000 Tornos Deco 13 basic machines come with robobar bar feeders SSF13BI. And some tool holders cross drilling holders and cross milling holders. There is one tool setter if sold as a pair.

2014 Citizen L-20E-2M12 with CAV20-L2E-IS Barloader, H.P. coolant (10 Line), Mist Collector, B Axis, Fire Suppressant system, and Chip Conveyor with 1665 run hours. Beautiful machine from Medical facility.

Star Ecas-32T
2009 STAR ECAS 32T with H.P., FMB Turbo 3-38 Magazine Barfeed, LNS Turbo Chip Conveyor

https://www.youtube.com/watch?v=Q9w5ckY6ZYs

Control: Siemens

FMB Turbo 3-38 Barfeeder

High Pressure

Mist Collector

Chip Conveyor

Number of Axes: 11

Cutting Diameter: 32mm

Cutting Length : 350mm

Tool Stations: 20

Spindles: 2

Spindle Speed: 7000 rpm

Motor Power: 7.5 kw

Specs to be verified by purchaser

2001 Star SR-20R
Fanuc 18iT

Iemca Genius 118 Barfeed

LNS Turbo Magnetic Chip Conveyor

Max. Turning Diameter: 3/4″

Max. Headstock Stroke: 8″

Max. Drilling Capacity: 25/64″

Spindle Speed: 10,000RPM

Spindle Indexing: .01Deg.(C-Axis)

Main Spindle Motor: 3.7KW

Tooling Positions: (18) 6OD, 4 ID, 4 Live BWID

Sub Spindle: 350-8,000RPM

Max. Chucking Diameter: 3/4″ ( 25/32″)

Number of Tools: 4 Live

Spindle Indexing: 15 Deg.

Motor: 2.2 KW

Equipped With:

Long Part Ejection

Full C Axis ( Sub and Main)

Rigid Tapping

High Pressure Coolant

Specs to be verified by purchaser

2007 STAR SR-32J
Iemca Mini Boss 332-E Barfeed

LNS Turbo Chip Conveyor

Long Part Ejection

Full C Axis: Sub/Main

High Pressure Coolant

Engraving

Max. Machining Dia. : 1-1/4″

Max. Headstock: 12-13/64″

Max. Headstock with RMGB : 11-1/32″

Number of Tools: 6

Number of Front Tools: 4

Number of Back Tools: 2 (Max. 4)

Main Spindle Indexing Angle: C-Axis Control ( 15 deg. :OP)

Main Spindle Speed: Max 7000 min.

Main Spindle Motor: 5.5 KW ( continuous) 7.5 KW (15min./60%ED)

Rapid Feed Rate: 24m/min (X,Y,Z,ZB,XB)

Specs to be verified by purchaser

2012/2013 Tsugami BO205-II with Fanuc Series Oi-TD Control, Edge Minuteman barfeed, backworking kit, only 755 Cutting Time hours. 

Standard Specification

B0205-II

Working barstock diameter

Ø3mm-20mm ( 0.118”-0.787”)

Main spindle speeds

200~10,000min-1

Sub spindle speeds

200~10,000min-1

Total number of tool positions

21 (16 included)

Rapid traverse rate

1260 IPM X: 945 IPM

Main and Sub Spindle Motors

5HP Main / 3HP Back

Width × Depth × Height

65”×41”×67”

Weight

3,748lbs

2016 Citizen L-32 type X with LNS Alpha 552 12' Magazine barfeed, 2,000 PSI Cool Blaster H.P., Mist Collector,

55 amp transformer

3 station sleeve for ¾ “ t8 and t9

3 color patlite

80 offsets

Chip conveyor

5 line high pressure coolant unit with heat exchanger and cooling fan

2000 psi CB510 Cool Blaster with harness for B-codes

Mist control

with Eight Cutting Axes (X1, Y1, Z1, X2, Y2, Z2, C1, C2)

Specifications to be verified by purchaser

2009 KSI SM-20 Swiss Sliding headstock machine with Fanuc 18i-TB Control, 12 ft. Magazine BarloaderLive backworking, 1,000 PSI H.P. Mist Collector, Chip Conveyor,  Purchased as a demo in 2013, this machine is in excellent condition with all options turned on in the control, very low hours.

2003 Citizen L-32 VII with High Pressure coolant, LNS Express Magazine barfeed, Mistbuster

2004 Citizen L-20 type VIII with High pressure coolant, LNS Express 332 Magazine barfeed, Mist collector

2004 Tsugami BS18/19B-III that has only cut aluminum, is holding tight tolerance, will include a chucker kit and Chip Blaster. Cut time hours show 454 on the machine but needs to be verified by purchaser.

2000 Tsugami BS18B that has only cut aluminum making one specific part. Customer has completed his order and needs to move this machine along with the 2004 ASAP.

2000 Tornos Deco 20 MM machine with LNS Hydrobar barfeed and various tooling included. Currently under power in the midwest and available for inspection.

(2) 2000 Tornos Deco 13 basic machines with robobar bar feeders SSF13BI. And some tool holders cross drilling holders and cross milling holders.

1999 Gildemeister MF Sprint 65 with 12 ft. Magazine barfeed, twin turrets with live tooling on upper turret, twin spindles, 8 station turrets, Siemens Sinumerik control, chip conveyor, parts conveyor, software program included. 65MM Capacity. There is a TON of tooling included along with channel sets for the barfeed.

2005 Citizen FL-42

Specifications

Maximum Machining Diameter

1.65"

Maximum Machining Length

3.15"

Backworking-Max. Chuck Diameter

1.69"

Backworking-Max. Work Length

3.15"

Spindle Speeds

6,000 RPM

Spindle Bore

1.82"

Spindle Motor 30 min./ Continuous

15 HP / 10 HP

Backworking-Spindle Speeds

6,000 RPM

Rotary Tool Motor

1.3 HP

Number of Tools

12 / 24 Tools

Turning Tool Size

0.625"

Rapid Traverse Rates X, Z1, Z2/X2

1000 IPM / 750 IPM

Machine Dimensions

90" x 66.6"

Machine Weight

5,620 lbs.

Equiped with

Full C Axis Spindle Rotation
Live Milling Capability
Subspindle
Fixed Headstock Design
Synchronous Tapping

2008 Citizen K-16 with Cav16-IS 12 foot magazine barfeed, H.P. unit and Mist Collector 850

2018 Star SW-12RII in excellent condition, with Live backworking, FMB Turbo 2-20 Magazine barfeed, H.P. Coolant, Tri-Mist 850 Mist Collector. This machine only has 117 Cut time hours on it and is like new. Under power and available for inspection.

2015 Tsugami SS327-5AX with B axis, FMB Turbo 3-38 Magazine barfeed, Parts Catcher, Chip Conveyor, Long Parts Ejector, and Chucker kit to run with or w/o guide bushing

2000 Star SR-20R with live backworking, NEW Edge Technologies Magazine barfeed, Chip Conveyor and H.P. Unit

2020 Maier ML26D with H.P., Mist Collector, and Minuteman 320SE 12’ Magazine Barfeed

2006 Star SR-20RII with H.P. unit, Mini Swiss 12 ft. Magazine barfeed, and live Backworking for sale

2015 Tsugami BO326-II 32MM Swiss with FMB 3-38, H.P. unit, Mist Collector Fire Suppression, 4400 hrs, Machine does have the rotary guide bushing attachment. And comes with all attachments shown 4 face for the sub and 3 cross for the main. Bar loader is an FMB Turbo 3-38 will have 2 channel sets 34mm & 20mm. Also has the axial device for chucker mode.

2004 CITIZEN C-32 with Iemca Magazine barfeed, H.P. Unit, and Mist collector

2003/2004 STAR SB-16 with C Axis on the main(15 degrees) and Z axis on the Sub spindle, 2004 LNS Hydrobar Express 332 Magazine Barfeed, H.P. Unit, Mist collector

2016 NOMURA DS NN-32YB2 XB SWISS MACHINE WITH B AXIS, C AXIS, H.P., Mist Collector, Patriot 338 Magazine barfeed, Approx. 1500 hours

The new YB series, the NN-32YB2 XB model, CNC automatic lathe features the XB unit mounted, holding tools of up to 33 (38 tools as optional) with B-axis tilting angles of 90deg, newly equipped with a sub side tool post that installs 6 OD tools and 5 live tools, as well as expaneded stroke ranges and power output inceased by employing a servomotor. High efficiency production and complicated machining can be possible by the optimum alignment of No.1 (main/15-tool) and No.2 (back/7-tool) tool posts made up of special casting iron. Sliding surface is crafted by scraping task to provide longer-lasting and high rigid performance. The CNC automatic lathe (NN-32YB2 model) has a 3.7/5.5kW motor driving the main spindle at a top speed of 8,000rpm. Maximum machining diameter of 32mm and machining length of up to 190mm/one chuck are listed, respective

2017 STAR SR20J type N with Iemca IDEAL 325 12 ft. Magazine barfeed, Chip conveyor, parts conveyor, H.P. Unit in Excellent condition. For sale as of 5-3-2022! Under power and available for inspection.

1999 Citizen FL32 with IEMCA Boss 542 12’ Magazine barfeed, 12 station turret, live tooling, sub spindle and parts catcher. 1.25” Maximum bar capacity and 7 LIVE tools included along with all books and manuals.

2023 L-32-1M10 WITH CAV32-LE-IS BARFEED, CUT-OFF TOOL BREAKAGE DETECTOR INCLUDED, WORK PIECE CONVEYOR, LFV, MISTCON 1000 MIST COLLECTOR, 3 STATION SLEEVE HOLDER, 20MM SMALL BAR ADAPER KIT, FIRETRACE SUPPRESSION SYSTEM, 3 SETS OF CHANNELS FROM 1" TO 1 1/4". This machine has NOT been run!! LOTS OF BUSHINGS AND COLLETS AVAILABLE!!

(2) 2023 CITIZEN L-32 TYPE VIII'S WITH CAV32-LE-IS BARFEEDS GSE 1810 3 FRONT/BACK LIVE TOOL UNITS, FIRETRACE UNITS, MISTCON 1000 MIST CONTROL UNITS, 20MM SMALL BAR ADAPER KIT, ALKART WIZARD PROGRAM CREATION & EDITING SOFTWARE, (3) SETS OF CHANNEL LOCK RANGING FROM 1/4" TO 1 1/4" (EACH FEEDER), NSK High Speed 2-Spindle System. One of these machines ran 2 cut-offs, the other has not been run. LOTS OF BUSHINGS AND COLLETS AVAILABLE

2008 Haas TM-1P Toolroom Mill with 30” X 12” X 16” (XYZ) travels, 6,000 RPM spindle, 10 ATC tool changer in great condition, under power and available for inspection.

2017 Hardinge Bridgeport V1000 VMC with Travels: X: 40.14”, Y:24” and Z:24”,

15,000 RPM 30/25 HP Integral Motor Spindle, Spindle Chiller, CAT 40 BIG PLUS V-Flange 30 Tool ATC, Spindle Jacket cooling system, Mitsubishi M70 Control/w 10.4” 3D Color Screen, Hinge style Chip Conveyor and Renshaw Probe Kit. This machine is in Excellent Condition with only 1372 Operating hours.

2016 Okuma Genos M-560V Vertical Machining Center with 15,000 RPM Spindle, Cat 40, 32 ATC tool changer, OSP-P300M Control, Tool Life Management, Spindle load monitor, synchronized tapping, Double Column Design Casting, TAS-C Thermal Sensors-Casting, TAS-S Thermal Sensors Spindle and Dual Jacket Cooling, Prep for High Pressure Coolant 1,000 PSI., Chip Management System-No chips on casting, Renishaw Gauging OMP 40/ OTS 40 Combination

2017 Hurco VM10i with 10,000 RPM Spindle, Cat 40, 20 Station Double Arm ATC, Tool Touch Probe and Winmax Classic option with Conversational control, 26” X 16” X 20” Travels (XYZ) 15 H.P. , Rigid Tap, Tool & Material Library, DXF Transfer, Chip Auger, Spindle and Tool Probe Package.

1995 Brother TC-324 Drill/Tap machine in great condition. Brother control, 10,000 RPM Spindle (original spindle just replaced in 2018), 10 ATC, Pallet changer, new amps in 2017. Under power and available for inspection

2001 Dah Lih Vertical Machining Center

50 Taper

Fanuc 18-M Control

Travels: X-57.09", Y-29.53", Z-29.53"

32 ATC

Spindle Speed: 6,000 RPM

Spindle Speed Range: Two Speed Variable

Specifications to be verified by purchaser

2006 Matsuura ES-1000V  with 12,000 RPM Spindle, 30 HP Spindle Motor, 40 ATC, 4th & 5th Axis, Coolant thru the spindle, chip flush, Renishaw NC-1 Toolsetter, chip conveyor, and it has $60,000 in upgrades (5th Axis Electrics with Matsuura 840Di Control, and Tsudakoma TN2004th & 5th axis with motors.

2016 Haas VF-3SSYT 40 Taper, 15,000 RPM Spindle, 30 H.P. Vector Drive, 300 PSI Coolant Through Spindle (21 bar), 4th Axis Drive & Wiring, Wireless Intuitive Probing System, Renishaw Wireless Tool, Enclosure Exhaust System, Programmable Coolant Nozzle, Chip Auger, High-Speed Machining with Look-Ahead, 5 C Collet Super High Speed 725 Deg/Sec Indexing with Manual. There is also a $13,000 Gibbs Software program that is transferable available with this machine.

Majestic FD-1822   Fixed Double Column Machining Center/ CNC Bridge Mill,  2011

Fanuc 18i-MB Control

Model:     FD-1822

Year:        2011

X-Axis Travel:                86.6"

Y-Axis Travel:                70.8"

Z-Axis Travel:                31.5"

Table Size:                               90.5" x 59"

Max Table Load:                      26,400 LB

Distance Between Columns:    72.8"

Spindle Nose to Table:             7.8" - 39.3"

X/Y-Axis Rapid Traverse:         787 IPM

Z-Axis RapidTraverse:             590 IPM

Feed Rate:                               314 IPM

Spindle Speed:                        6,000 RPM

Spindle Taper:                          CAT-50

Spindle Motor:                         30/35 HP

Auto Tool Changer:                  40

Max Tool Weight:                     44 LB

Approx. Machine Weight:    52,800 Lb   

Approx. Dimentions:                    

Geared Spindle

Through Spindle Coolant

Full Enclosure

Fanuc 18i-MB CNC Control- 80 MB Memory Capacity & 200 Stored Programs

1999 Brother TC-229N drill tap machine with 10,000 RPM spindle, 14 ATC, 30 taper

1993 Mazak V-414 Vertical Machining Center with:

16” x 22” Travel 7000 rpm Spindle Mazatrol M-32 Control

1998 Kitamura Mycenter 3X with Yasnac i-80M control, 10,000 RPM Spindle, 20 ATC

2015 Okuma Genos M560-VA with 30 H.P. Spindle, 32 ATC, Cat 40, Big Plus Taper, 15,000 RPM Spindle (Direct Drive), OSP 300 Control, Real 3 D Simulation, Tool Life Management, Sync. Tapping, 160 Gig Memory, 15.1” Color Monitor-Touch Screen, Double Column Design Casting, TAS-S Thermal Sensors Spindle and Dual Jacket Cooling, Chip Conveyor, H.P. Coolant with Coolant thru the spindle, wired for 4th & 5th Axis, Nikken 4th & 5th Axis also available.

1998 Mori SV-500 with Cat 50 Taper, 6,000 RPM, 30 H.P., 30 ATC, MSC-501 Control, X: 31.5”, Y: 20.1”, Z: 20.1” Travels, Equipped with Custom Macro B, Rigid Tapping, Helical Interpolation, includes vices and about 30-40 tool holders

Mori Seiki SV-50/40 Taper VMC with 10,000 RPM’s, Cat 40, 30 H.P Motor, 20 ATC, MSC-501 Control, Travels: X: 31.5”, Y: 20.1”, Z: 20.1”, Equipped with: Prepped for Coolant thru spindle (1,000 PSI), Tsudakoma Indexer RNE-160R (New in 2017), M-Code Activated, includes Tailstock, Custom Macro B, Rigid Tapping, Helical Interpolation, Includes Vises and Various Cat-40 tool holders w/pull studs

2006 Hardinge XR760 VMC with Fanuc Series 18i-MB Control, 12K RPM Spindle, Cat 40, Coolant thru the spindle, fully integrated 4th & 5th axis Tsudakoma TN-160 tilt and rotate table, capable of 3+2 Programming. Travels: X: 30” X Y: 24” X Z: 24”